Quality Inspector

Inspection Activities

• Perform 100% visual inspection of painted plastic automotive components.

• Check parts for paint defects such as:

  • Scratch marks

  • Dust / dirt inclusions

  • Orange peel

  • Paint runs / sags

  • Color mismatch

  • Gloss variation

  • Pinholes / bubbles

  • Peel-off / poor adhesion

  • Sink marks / molding defects visible after paint

• Verify  fitment points, clips, tabs, and mounting areas where required.

• Use master samples, boundary samples, control plans, and inspection standards.

• Segregate OK / Not OK material clearly.

Rework Activities

• Carry out approved rework processes such as:

  • Cleaning and polishing minor defects

  • Buffing

  • Touch-up as per work instruction

  • Sticker / label correction

  • Minor assembly correction

  • Safe handling and repacking

• Ensure reworked parts meet acceptance criteria before release.

• Identify parts beyond repair and move to rejection area.

Quality Control & Documentation

• Maintain inspection reports, rejection records, hourly output sheets, and traceability records.

• Mark defects correctly as per defect coding system.

• Report abnormal rejection trends immediately to supervisor.

• Follow FIFO and batch identification practices.

Handling & Safety

• Handle painted parts carefully to avoid scratches and dents.

• Use gloves, finger cots, and approved PPE.

• Maintain 5S at workplace.

• Follow customer-specific handling standards where applicable.

Required Skills & Competencies

• Good understanding of visual quality standards for painted surfaces.

• Ability to identify paint defects accurately.

• Knowledge of automotive plastic components such as bumpers, grills, garnish, trims, bezels, mirror covers, etc.

• Basic understanding of quality tools: OK / NG segregation, traceability, defect tagging.

• Ability to work in shifts and under production pressure.

• Good eyesight / color recognition ability.

• Attention to detail and discipline.

Education & Experience

• Minimum:  ITI.Diploma preferred.

• +2 years experience in automotive plastic painted parts inspection/rework preferred.

Performance Indicators (KPIs)

• Inspection accuracy

• Rework success rate

• Rejection reduction

• Productivity per shift

• Customer complaints / escapes

• Attendance & discipline

• 5S compliance

Working Conditions

• Shopfloor / warehouse / customer  at site 

• Standing job for long hours

• Rotational shifts if required Three shifts

Salaries –

• Inspectors –  Max INR 23,000 CTC

• Rework Technician – Max  INR 26,000 CTC 

• Accommodation can be provided upto 2000 PPPM

• Canteen 45 rupees per day if not provided by client , if canteen is free then no amount will not be paid to employees.

Additional Preference

• Experience in OEM / Tier 1 automotive supplier environment.

• Knowledge of customer standards such as Nissan, Ford, Tata, Mahindra, etc.

• इस फुल टाइम वेयरहाउस Job में वेयरहाउस में 2 - 3 वर्षो का अनुभव वाले उम्मीदवारों की जरुरत है।